bengkel las di cibinong - https://bit.ly/358G3m5. Welding according to the big Indonesian Dictionary (1994) "is joining iron by burning. Welding is one of the metal joining techniques by melting some of the parent metal and filler metal considering or without pressure and similar to or without appendage metal and producing a continuous connection. Welding subsequent to the method known today, became known at the initiation of the 20th century. As a heat source used flare from the combustion of acetylene gas which became known as carbide welding. At that time, electric welding had been developed, but it was yet rare.

Based on the definition of DIN (Deutch Industrie Normen) welding is a metallurgical union at the guide metal joint which is carried out in a melted or liquid state. From this definition, it can be additional elaborated that welding is a local association of several metal rods using heat energy. At this time, 40 types of welding have been used, including welding which is carried out by pressing two united metals as a result that these two metals can be glued together.
Welding is one of the metal joining techniques by melting some of the filler metal subsequently or without pressure and considering or without extra metal which produces a continuous connection. The scope of use of welding techniques in construction is extremely wide, including shipping, bridges, steel frames, pressure vessels, pipe pipes, pipelines and fittingly on.

Welding techniques are sought after by some people who want to learn to weld. We can acquire these techniques in vocational or perplexing schools. However, for unexceptional people who want to log on a welding workshop business, for example, they tend to not have get older to laboratory analysis formally. Therefore, we will have enough money some welding tips that we wish can incite us all in learning how to Weld Correctly.

The with is the perfect welding procedure:

Clean the material to be welded. Use a hammer to descale the surface of the place to be welded. Use a steel brush for maximum results.
Place the material to be welded in the look provided. Be it using a workbench or just laying it upon the floor. get used to the density in the midst of the two materials. Use clamps if needed.
Place the welding robot lump on one portion of the material to be welded. insert the electrode upon the electrode clamping panel upon the welding machine. Install the outlook of the electrode according to the slant of the material. Usually there is a special area for the electrode slope upon the electrode clamping pliers. Be it 90 degree, 30 or 40 degree perpendicular.
After the material is ready to be welded, slowly bring the tip of the electrode closer to the material to be welded.
The disaffect along with the tip of the electrode and the material to be welded greatly affects the mood of the welding. If the disaffect is too far, there will be sparks later than rain of flare spots. The welding process will not be perfect. If the distance is too close, the flame will not burn properly. And there is not satisfactory isolate for the melting electrode. A fine turn your back on is one-eighth of the thickness of the electrode.
By using a protective mask or welding goggles, you can pay attention to the ration of the electrode that has melted which unites the two materials subconscious welded. Slowly involve the electrode along the welded area.
Good results during the welding process can be seen in imitation of the welded surface is shaped subsequently a tight and regular greeting that entirely covers the welded part.
When finished, tidy the scale that covers the welded parts using a hammer. Check again whether there are parts that are not perfect. If it's not perfect, repeat the parts that haven't been put together well. In some cases, the welded material must be grinded over if the welding is not perfect. But if it's not too fatal, we just habit to weld the parts that haven't been welded perfectly.